|
For more detail instruction about the installation, please contact
tech support.
Tool Required: a small flat screwdriver.
Step 1: Use the flat screwdriver to open the side door courtesy light
lamp lens.
Step 2: Take the stock tungsten bulb(s) out and
directly replace back with the JDM LED bulb(s).
Step 3: Test it, it the bulb(s) won't light up, please take the
bulb(s) out, rotate the bulb(s) 180 degree and re-install back again.
Step 4: Put back the side door courtesy light lens. Enjoy your
beautiful LED side door lights.
 | 
